The 0401 Stationary Truck Shelter is perfect for dock openings and is one of the most versatile shelters available. It covers a wide variety of door sizes and handles an even wider variety of trailer sizes. The 0401 requires little maintenance or service and has an extremely long life span. The frame is made with pressure treated wood or sturdy galvanized steel tubing that will not warp, rot or twist.

Series 0401 standard dimensions for a door open 10′ W x 10′ H are 11’6” W x 11′ H x 24” projection with 21” wide inward vertical panels and a 36” drop header panel.

With a dock height of 48” the Series 0401 seals trailers from 12” to 13’6” high from grade. Also seals trailers with width over 8′ W. The Series 0401 can be designed to suit a large variety of oversized door opening heights, widths and or dock projections.

Super Seal’s Series 0401 unit framework are manufactured either using pressure treated wood or constructed of 1- 1/2” x 1-1/2” galvanized steel tubing covered with galvanized cladding. The header framework shall be peaked to allow adequate drainage. The vertical inward panel shall contain fiberglass stays, the top three (3) being a “Z” pattern to keep the curtain straight at all times. Vertical panels have a double layer of fabric at the leading edge impact area and a 4” wide x 14” high yellow guide stripe to aid in spotting shelters. The header panel has full height fiberglass stays and overlapping protective flaps at trailer impact areas. The header panel has elastic wind straps to keep the panel in position.

All stays are enclosed in multi-layer reinforcement pockets. Leading edge of vertical and header panels have a sewn in foam bead for a tight seal. Double stitched, high strength twisted 4 ply 100% polyester boned thread U.V. treated used for sewing throughout. All exterior front frame edge shall be trimmed with aluminum angle to provide a neat, clean finish. Unit to be furnished with all necessary mounting hardware, galvanized to resist corrosion. 18” – 20” projection in front of the dock bumper is recommended to provide a proper seal.

Optional protective steel guards are recommended for added protection and support.

Options Available:

• Flat Top Unit
• Tapered Unit
• Extra Width of Unit
• Extra Height of Unit
• Extra Height Curtain Drop
• Extra Inward Projection
• Steel Protective Guard (Mounting hardware not incl.)
• Monofilament Fabric
• Bottom Draft Pads
• Super Split Protective Flaps
• Full Height Yellow Guide Stripe
• Super Snug (add to Inward Projection)

Product Downloads: